PH – SINGLE STAGE HAND PUMP
The single stage PH series of hand pumps are available in 700 & 800 Bar working pressure. There are also available fully assembled with 2m long hose, swivel coupling and female coupling, (original quick coupling).
Technical Tip: To always ensure complete operator safety, we recommend the fitting of a pressure gauge, with gauge adaptor.
PHS – TWO STAGE HAND PUMP
The Two stage PHS hand pump, comes with a pressure gauge as standard. This gives the user a precise and safe control over the work carried out. The 2-stage function makes the pump simple to operate, permitting the cylinder of hydraulic tool to reach its working position much faster, compared with 1-stage pumps. The PHS pumps are also available fully assembled with hose including quick coupling and swivel coupling
PME- ELECTRICALLY POWERED PUMPS
The electrically powered hydraulic pumps are reliable, versatile, and easy to use. All pumps has a double-speed operation with automatic switching between high and low pressure, depending on the pump type. Two models are equipped with foot actuated pedal for on/off control and all other models have a start/stop button placed on the motor.
PMP – PETROL POWERED PUMPS
Hydraulic petrol-driven with a high oil flow rate. Petrol-driven pumps are a good alternative when you need a mobile pump that does not require an external source. Examples are on building sites, shipyards, ships and in rescue situations.
PP – AIR HYDRAULIC PUMPS
PP – AIR hydraulic pumps are compact pumps that operate in any position, horizontally or vertically. The pumps can easily be operated by hand or foot.
Technical Tip: To always ensure complete operator safety, we recommend the fitting of a pressure gauge, with gauge adaptor.
CYLINDERS – HIGH POWER AT A LIMITED SPACE
REHOBOT’s cylinders are designed to withstand rough handling in harsh environments. Their use is highly varied. The cylinders can be used wherever there is something which needs to be pulled, pushed, or lifted.
TECHNICAL CHARACTERISTICS / ADVANTAGES
- Hard chromed pistons, making them resistant to wear and free of rust.
- Galvanized cylinders for increased corrosion resistance.
- Mechanical stop for the piston movement.
CLF - LOW PUSH CYLINDERS WITH SPRING RETURN
CLF cylinders are the right choice for those who need flexible cylinders with small dimensions. With capacities ranging from 5 tons to 200 tons makes them suitable for lifting and other for purposes.
CH/CHF – SINGLE ACTING STEEL HOLLOW BORE CYLINDERS
CH/CHF hollow cylinders can due to the through-hole be used for both push or pull operations. CH/CHF cylinders have a capacity of 6 tons to 51 tons and is very compact in its exterior dimensions.
CHFA – ΚΥΛΙΝΔΡΟΣ ΑΠΟ ΑΛΟΥΜΙΝΙΟ, ΜΟΝΗΣ ΔΡΑΣΗΣ
CHFA series consists of cylinders made of aluminum. This makes the products up to 50% lighter than comparable models made out of steel. Due to its construction, hollow cylinders can be used for both push and pull operations. CHFA cylinders are available with capacities between 13 ton to 103 ton.
HIGH PRESSURE PIPES FROM 1000 Bar TO 3300 Bar WITH BURST PRESSURE UP TO 8250 Bar
High pressure flexible hoses. The hose can reach up to 3300 Bar, with Burst Pressure of 8250 Bar. The hoses are made with polyurethane material and have steel reinforcement.
Polyurethane provides good abrasion resistance so all pipes have a longer lifespan than the rest and a lifetime exceeding other standard rubber hoses.
All hoses have the same connection thread type on both ends of the hose.
Safety in every detail also applies to this special selection of high pressure hoses for hydraulics. Unique materials and manufacturing methods guarantee superior characteristics in comparison with traditional rubber hoses. All types can be supplied ready assembled, and factory tested in the required length. More connection options than those listed are available on request.
THE PRIMARY FEATURES OF THE HOSES ARE:
- Low weight.
- Small outside dimensions.
- Maintained flexibility through entire life.
AQ- QUICK COUPLINGS
All quick couplings from REHOBOT have a check valve and are supplied with seals and protection caps made of metal or plastic. Protection caps prevent contamination of the hydraulic system.
VALVES OVERVIEW
“RAKOR HELLAS” offers many different types of valves. Ranging from shut-off valves, with regulating functions, directional valves, and other valves for safety purposes. NOTE! Seals are always included for valves. With accessories from us, you always get parts that fit your equipment at 100%
